UPC FiberPower – setting up the Cisco EPC3000 modem
Posted by jpluimers on 2012/08/27
If ever UPC has an outage like this again, and I need to fiddle with the Cisco EPC3000 cable modem…
From the manual (edited for typos and readability):
- Indien modem niet binnen enkele minuten vanzelf online komt: breng het modem online door via de browser van jouw laptop naar: http://192.168.100.1/gscan.asp te gaan.
Voer handmatig de frequentie 306750000 in en klik op ‘Click here restart your cable modem’. (Achter de RT hubs, Rotterdam gebied, is de frequentie 308000000)- Wanneer de modem online is controleer je de retoursignalen van de modem door op de modem in te loggen.
Dit doe je door de volgende link te gebruiken: http://192.168.100.1/signal.asp.
Controleer in dit scherm de waarde “Power Level”. Als dit level 55 dBmV of hoger is (55-58) moet je contact opnemen met UPC.
And yes,
- the button on the Cisco indeed reads “Click here restart your cable modem”.
- they switch from “het modem” to “de modem”
Some links I might need then:
- http://anilsoni85.blogspot.com/2012/03/hathway-cable-modem-secrets.html
- http://forums.cable-modem.net/index.php?action=vthread&forum=2&topic=1001
- http://books.google.nl/books?id=PblPcRqHM0wC&pg=PA194&lpg=PA194&dq=”http://192.168.100.1/gscan.asp”+password
- http://forum.mediaswiat.pl/viewtopic.php?p=66456
Useful links inside the Cable modem:
- http://192.168.100.1/_aslvl.asp
- http://192.168.100.1/index.html
- http://192.168.100.1/gscan.asp
- http://192.168.100.1/adv_prod.asp
- http://192.168.100.1/_dlcert.asp
- http://192.168.100.1/system.asp
- http://192.168.100.1/log.asp
- http://192.168.100.1/signal.asp
- http://192.168.100.1/status.asp
- http://192.168.100.1/adv_index.html
- http://192.168.100.1/adv_dhcp.asp
- http://192.168.100.1/adv_interfaces.asp
- http://192.168.100.1/adv_qos.asp
- http://192.168.100.1/techsupport.htm
And pwds that might work:
user: admin
password: W2402
user: admin
password: atlanta
–jeroen
http://192.168.100.1/index.html
The Wiert Corner - irregular stream of stuff 
Leave a comment