For my link archive:
Archive for the ‘ADS-B receivers’ Category
Apply for a free ADS-B receiver – Real-time flight tracker | Flightradar24
Posted by jpluimers on 2024/10/28
Posted in ADS-B receivers, Hardware, Power User | Leave a Comment »
jilles.com on Twitter: “Question for Dutch HAM radio amateurs, what frequencies are interesting to monitor for digital data? EG IoT/SSTV/Pocsag”
Posted by jpluimers on 2024/02/08
Some links around a question that Jilles posted in 2022: [Wayback/Archive] jilles.com on Twitter: “Question for Dutch HAM radio amateurs, what frequencies are interesting to monitor for digital data? EG IoT/SSTV/Pocsag”
Posted in ADS-B receivers, Development, Hardware, Power User, Software Development, USB | Leave a Comment »
Some notes on receiving ADS-B signals and feeding them to the OpenSky Network and other flight tracker
Posted by jpluimers on 2022/04/07
Long story short: in many countries, flight operators overload larger and larger portions of their country with excessive noise levels. Somehow they seem to circumvent regulations over and over again.
The Netherlands is no exception, having regulations based on noise “estimates” instead of measurements, and the measurements that are done being owned by the flight operators.
A while ago, the public started to do their own measurements, for instance by the Explane app which relies on the OpenSky Network for flight data.
Living near to an airport that has sleeping slots for their surrounding inhabitants (some 1.5 million plus people) of roughly 23:00-02:00 and 02:30-06:00) the public cost are ever increasing, especially with the planned opening of a new airport causing the split of the flight paths to affect some 5 million inhabitants, I decided to at least feed the OpenSky Network for better coverage of large parts of the sky around the first and second airport.
Explain related links:
- [Wayback/Archive.is] ExPlane – the app to register aviation noise
- [Wayback/Archive.is] Aviation Noise Reports by Explane.org (open data!)
- [Wayback/Archive.is] ‘No airplane captured’ (it’s not an error!) | Explane.org
- [Wayback/Archive.is] Explane en de melding ‘No Airplane Captured’ | SchipholWatch
OpenSky Network (as it is used by Explane) and required equipment:
- [Wayback] Which SDR do you use? – OpenSky Forum (covers both SDRs and antennas)
- [Wayback] Dump1090 OpenSky Feeder (Raspberry Pi-based)
- [Wayback] The OpenSky Network – Free ADS-B and Mode S data for Research
- [Wayback] ADS-B Multiple Feeds
- [Wayback/Archive.is] openskynetwork/receiver-kit
Wikipedia:
- Flight tracking – Wikipedia
- Automatic Dependent Surveillance–Broadcast
- Aviation transponder interrogation modes
- Software-defined radio
- FLARM
Also of interest is ADS-B Exchange as it provides unfiltered data:
–jeroen
Posted in ADS-B receivers, Hardware, Power User | Leave a Comment »







