Archive for the ‘macOS 10.12 Sierra’ Category
Posted by jpluimers on 2019/06/03
What key combination do I have to press to create a line break in a cell in Excel for Mac 2011? The Windows combination of Alt+Enter does not work on the Mac.
Source: [WayBack] keyboard – How to add a line break in a cell in Excel for Mac – Ask Different
The answer depends on the Excel for Mac OS X version you are using.
Excel 2015 is simple (thanks esham): use Option+Enter.
In older Excel <= 2011 (thanks nwinkler), use Command+Option+Enter or Control+Option+Enter.
Some users report the also need the Fn key in addition to the above modifiers.
–jeroen
PS: Later I found out that [WayBack] Beckism.com: Use a linebreak in Excel on Mac also shows the Excel <= 2011 solution Control+Option+Return (note that Return is the same key as Enter).
Posted in Apple, Excel, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, macOS 10.12 Sierra, Office, Office 2011 for Mac, Power User | Leave a Comment »
Posted by jpluimers on 2019/04/29
From [WayBack] osx lion – osx change printer ip address without adding new printer – Super User:
Q
Is there a way to change a printer’s IP address in OSX (Lion) without having to add a new printer? I did find Printer IP Remedy, but was curious if there was an ‘official’ method.
A
You can do this in the CUPS web interface with the following steps:
- Open Terminal.app and run
cupsctl WebInterface=yes. This enables the CUPS web interface
- Open
http://127.0.0.1:631/printers in your web browser
- Click on the printer you want to change. From the “Administration” drop down, select “Modify Printer”.
- Log in with your local admin account
- Select the new printer IP either from “Discovered Network Printers” or add it manually with “Other Network Printers”. Make sure that you keep the same connection protocol as it says in “Current Connection” (for me, this was LPD).
Once you’re done with this, Mac OS X will directly print to the new IP address. There is no need to reboot or so. If you want to disable the CUPS web interface again, run cupsctl WebInterface=no.
The CUPS solution works splendid in MacOS as well, so there was no need for [Archive.is] Printer IP Remedy 1.3 free download for Mac | MacUpdate.
Without the CUPS web interface enabled, the web-interface at http://127.0.0.1:631/printers looks like this:
Web Interface is Disabled
The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.
After enabling it like the CUPS web interface wit cupsctl WebInterface=yes, you can see I have the same printer configured multiple times with different communication protocols and output languages:
Printers
Search in Printers:
Showing 6 of 6 printers.
| Queue Name |
Description |
Location |
Make and Model |
Status |
| OKI_MC342_36855D |
OKI-MC342-PSO-36855D |
Office |
MC342-AirPrint |
Idle |
| OKI_MC342_36855D_PCL |
OKI-MC342-36855D PCL |
1060NP-Office |
Generic PCL Laser Printer |
Idle |
| OKI_MC342_IPP |
OKI-MC342-IPP |
Office |
Generic PostScript Printer |
Idle |
| OKI_MC342_LPR |
OKI-MC342-LPR |
Office |
Generic PostScript Printer |
Idle |
The first two printers were mapped by DNS, but the last two were mapped by IP address.
Changing the IP address was simple:
- Click on each link
- Select “Modify printer”
- Authenticate (only needed for the first printer change)
- For IPP: note the current address (like ipp://192.168.71.52/), then
- Choose “Internet Printing Protocol (ipp) “
- Click “Continue”
- Enter the correct ipp://…./ address (help is at http://127.0.0.1:631/help/network.html or http://127.0.0.1:631/help/network.html?PRINTABLE=YES)
- Click “Continue”
- Check the modifications (optionally change Description/Location)
- Click “Continue”
- Keep the driver
- Click “Modify printer”
- For LPD, note the current address (like lpd://192.168.71.52/), then follow the IPP steps, but choose “LPD/LPR Host or Printer” and enter a valid lpd address.
This is also the place where you can change “Default options”, like paper size (which – for all but the first – somehow defaulted to US Letter 11 inch, while it is actually filled with A4 paper).
At the end, disable the web interface: cupsctl WebInterface=no.
Related:
–jeroen
Read the rest of this entry »
Posted in *nix, *nix-tools, Apple, iMac, Mac, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, macOS 10.13 High Sierra, Power User | Leave a Comment »
Posted by jpluimers on 2019/04/25
Yes, occasionally, people still use DVD or CD disks, so thanks [Archive.is] Chris Bensen: macOS How to create an ISO from a CD or DVD:
Put in your CD or DVD, Open Terminal, type:
ls /Volumes
Find the volume in the list, then type where /path/to/volume is the CD or DVD you want:
hdiutil makehybrid -iso -joliet -o Image.iso /path/to/volume
–jeroen
Posted in *nix, Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Pro, macOS 10.12 Sierra, Power User | Leave a Comment »
Posted by jpluimers on 2019/03/29
When connecting from my Mac to my ESXi rig, some commands (especially less) show this output:
WARNING: terminal is not fully functional
So I created this alias to connect from my Mac to the internal address of my ESXi rig:
alias ssh-esxi-X10SRH-CF-internal='TERM=xterm ssh -p 22 root@192.168.71.91'
The trick is the bold part: TERM=xterm (which you can also replace by export TERM=xterm; if you want future ssh sessions to use the same [wayback] TERM setting).
The reason is that the Mac defines the TERM variable as containing xterm-256 which is defined on the Mac itself, but ESXi has a hard time coping with it.
Some Mac OS and Xcode combinations had a problem with xterm-256 not being present ([WayBack] macos – Terminal strangeness after installing Xcode on Lion – Super User), but this isn’t the case on my system:
$ ls -alh `find /usr/share/terminfo | grep 'xterm-256color'`
-rw-r--r-- 1 root wheel 3.2K Jul 30 2016 /usr/share/terminfo/78/xterm-256color
On the Mac you really want to use xterm-256color as it looks way better than xterm-color or xterm: [WayBack] linux – What is the difference between xterm-color & xterm-256color? – Stack Overflow (thanks [WayBack] Chris Page!)
It seems I already did something similar on ESXi itself to get esxtop working: ESXi: when esxtop shows garbage. That was on the ESXi side and works as well for this problem too.
However, it is a bit harder to have a script run during ESXi boot time that sets this, so it is easier to fix this on the Mac side.
It works for all OS X and ESXi versions I’ve tested so far.
–jeroen
Posted in *nix, Apple, ESXi5.1, ESXi5.5, ESXi6, ESXi6.5, iMac, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Virtualization, VMware, VMware ESXi | Leave a Comment »
Posted by jpluimers on 2019/02/22
This has happened to me on most Macs with most Apple Mac OS X / MacOS / whatever versions: the built in sound controls for internal speakers and head phones fail to work (keyboard shortcuts and UI both fail).
The solution at [WayBack] mavericks – Unable to modify the volume with the keyboard – Ask Different works, but be sure to require the kernel module steps:
open up a Terminal window and run:
sudo killall coreaudiod
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
–jeroen
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2019/01/28
macOS DisplayLink driver downloads: 4.1 works fine with MacOS 10.12 Sierra on a 15-inch mid 2015 Retina MacBook Pro.
Downloads:
–jeroen
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Pro, macOS 10.12 Sierra, Power User | Leave a Comment »
Posted by jpluimers on 2019/01/18
Two installation options for TigerVNC:
The [WayBack] TigerVNC viewer gives a bit more details on failing VNC connections than the stock OSX Screen Sharing.app does: after performing the logon, the connection would just stall, but TigerVNC would should “write broken pipe (32)” after the logon. Most of the linked search results indicated the VNC server was having a state problem.
So I restarted the VNC server, after which connections could be made again in both tools.
I actually prefer the stock Screen Sharing.app as:
–jeroen
Posted in Apple, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, VNC/Virtual_Network_Computing | 2 Comments »
Posted by jpluimers on 2018/12/07
A long time ago, I bumped into [WayBack] Mac Photo/Slideshow Viewer that supports recursion: Phoenix Slides, but only recently I discovered it has made it to GitHub as well, so now you can download it from two places:
Despite the Phoenix Slides product name, the repository is at https://github.com/gobbledegook/creevey
–jeroen
Posted in Apple, Mac OS X / OS X / MacOS, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2018/08/03
Somewhere after Yosemite, braindead Mac OS X forcibly maps “Ctrl+Click” to right-click. In past versions, you could disable but those days have gone.
This means that inside Windows on VMware Fusion, you cannot add/remove items to/from a selection any more (for instance in the Windows Explorer).
Various workarounds turned up in my Google Search, but only this one works:
Holding down CTRL + OPTION together and LEFT CLICKING will do this.
Source: [WayBack] vmware fusion – How to use the control key in VM Ware? – Super User
–jeroen
via:
Posted in Apple, Fusion, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.9 Mavericks, Power User, Virtualization, VMware | Leave a Comment »
Posted by jpluimers on 2018/06/11
- Connect the volume you want excluded to the Mac, even if Spotlight is currently indexing
- Launch “System Preferences” and click on “Spotlight” followed by the ‘Privacy’ tab
- Drag the drives icon into the Privacy window
Source and more information (including how to do this from the terminal): [WayBack] Stop Spotlight from Indexing Time Machine Backup Volumes & External Drives
–jeroen
Posted in Apple, iMac, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | Leave a Comment »
The Wiert Corner - irregular stream of stuff 