Archive for the ‘MacBook Retina’ Category
Posted by jpluimers on 2019/09/13
When all else fails: [WayBack] How to start up your Mac in Internet Recovery Mode.
Command-Option-R is one of the plethora of keyboard tricks you can use during boot:
Some Mac features are available by holding down certain keys during startup.
[WayBack] Startup key combinations for Mac – Apple Support
| Hold during startup |
Description |
| Shift ⇧ |
Start up in Safe Mode. |
| Option ⌥ |
Start up to Startup Manager. |
| C |
Start up from a bootable CD, DVD, or USB thumb drive (such as OS X install media). |
| D |
Start up to either Apple Hardware Test or Apple Diagnostics, depending on which Mac you’re using. |
| Option-D |
Start up to either Apple Hardware Test or Apple Diagnostics over the Internet. |
| N |
Start up from a compatible NetBoot server. |
| Option-N |
Start up from a NetBoot server using the default boot image. |
| Command (⌘)-R |
Start up from OS X Recovery. |
| Command-Option-R |
Start up from OS X Recovery over the Internet. |
| Command-Option-P-R |
Reset NVRAM. Release the keys after you hear the startup sound again. |
| Command-S |
Start up in single-user mode. |
| T |
Start up in target disk mode. |
| X |
Start up from an OS X startup volume when the Mac would otherwise start up from a non-OS X startup volume. |
| Command-V |
Start up in verbose mode. |
| Eject (⏏), F12, mouse button, or trackpad button |
Eject removable media, such as an optical disc. |
Read the rest of this entry »
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Pro, OS X 10.11 El Capitan, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2019/08/23
I forgot about the announcement that Signal had also become available on the Desktop, but it is via [WayBack] https://signal.org/download/:
- Mac
- Windows
- Debian based x64 Linux:
$ curl -s https://updates.signal.org/desktop/apt/keys.asc | sudo apt-key add -
$ echo "deb [arch=amd64] https://updates.signal.org/desktop/apt xenial main" | sudo tee -a /etc/apt/sources.list.d/signal-xenial.list
$ sudo apt update && sudo apt install signal-desktop
I like the mix of echo and tee to update the [WayBack] /etc/apt/sources.list.d folder with the signal-xenial.list file.
These links will always give you the latest download filename:
The files you get there will be relative to the path https://updates.signal.org/desktop/ so will be similar to:
You can get the sources at https://github.com/WhisperSystems/Signal-Desktop/releases
Via:
–jeroen
Posted in *nix, Android Devices, Apple, Debian, iMac, iOS, iPhone, Linux, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, Power User, Windows | Leave a Comment »
Posted by jpluimers on 2019/06/10
Via [WayBack] ms office – Keyboard shortcut to select all text in a cell in Excel – Ask Different a few keyboard tips.
Lets start with the shortest one:
- Put the focus on the cell (click, use arrow keys, etc)
- Press space
- Press
Command–Z or Control–Z to undo the change
This probably is unintended, but works great: all text is now selected, so you can copy/cut with Command-C/Command–X.
Now the “official” way:
- Put the focus on the cell (click, use arrow keys, etc)
- Press
Control–U or F2 to edit the cell (the cursor is now at the end)
- Press
Shift–Alt–Home or Shift–Control–Home (to select all text)
note: Home can also be Fn–Left.
Other selections you can make while the cell is in edit mode:
- Press
Shift–Alt–End or Shift–Control–End (to select to the end of the cell)
note: End can also be Fn–Right.
- Press
Shift–Alt–Right or Shift–Control–Right (to select one word to the right)
- Press
Shift–Alt–Left or Shift–Control–Left (to select one word to the left)
- Press
Shift–Alt–Down or Shift–Control–Down (to select to the same position on the line below)
- Press
Shift–Alt–Up or Shift–Control–Up (to select to the same position on the line up)
Keyboard symbols (more at [WayBack] Command, Option, & Shift Symbols in Unicode):
⇧ – Shift^ – Control⌥ – Alt which is the same as Option⌘ – CommandFn – Function
–jeroen
Posted in Apple, Excel, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, Office, Office 2011 for Mac, Power User | Leave a Comment »
Posted by jpluimers on 2019/06/07
For my link archive:
–jeroen
Posted in Apple, iMac, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, macOS 10.13 High Sierra, OS X 10.11 El Capitan, Power User | Leave a Comment »
Posted by jpluimers on 2019/06/03
What key combination do I have to press to create a line break in a cell in Excel for Mac 2011? The Windows combination of Alt+Enter does not work on the Mac.
Source: [WayBack] keyboard – How to add a line break in a cell in Excel for Mac – Ask Different
The answer depends on the Excel for Mac OS X version you are using.
Excel 2015 is simple (thanks esham): use Option+Enter.
In older Excel <= 2011 (thanks nwinkler), use Command+Option+Enter or Control+Option+Enter.
Some users report the also need the Fn key in addition to the above modifiers.
–jeroen
PS: Later I found out that [WayBack] Beckism.com: Use a linebreak in Excel on Mac also shows the Excel <= 2011 solution Control+Option+Return (note that Return is the same key as Enter).
Posted in Apple, Excel, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, macOS 10.12 Sierra, Office, Office 2011 for Mac, Power User | Leave a Comment »
Posted by jpluimers on 2019/04/29
From [WayBack] osx lion – osx change printer ip address without adding new printer – Super User:
Q
Is there a way to change a printer’s IP address in OSX (Lion) without having to add a new printer? I did find Printer IP Remedy, but was curious if there was an ‘official’ method.
A
You can do this in the CUPS web interface with the following steps:
- Open Terminal.app and run
cupsctl WebInterface=yes. This enables the CUPS web interface
- Open
http://127.0.0.1:631/printers in your web browser
- Click on the printer you want to change. From the “Administration” drop down, select “Modify Printer”.
- Log in with your local admin account
- Select the new printer IP either from “Discovered Network Printers” or add it manually with “Other Network Printers”. Make sure that you keep the same connection protocol as it says in “Current Connection” (for me, this was LPD).
Once you’re done with this, Mac OS X will directly print to the new IP address. There is no need to reboot or so. If you want to disable the CUPS web interface again, run cupsctl WebInterface=no.
The CUPS solution works splendid in MacOS as well, so there was no need for [Archive.is] Printer IP Remedy 1.3 free download for Mac | MacUpdate.
Without the CUPS web interface enabled, the web-interface at http://127.0.0.1:631/printers looks like this:
Web Interface is Disabled
The web interface is currently disabled. Run “cupsctl WebInterface=yes” to enable it.
After enabling it like the CUPS web interface wit cupsctl WebInterface=yes, you can see I have the same printer configured multiple times with different communication protocols and output languages:
Printers
Search in Printers:
Showing 6 of 6 printers.
| Queue Name |
Description |
Location |
Make and Model |
Status |
| OKI_MC342_36855D |
OKI-MC342-PSO-36855D |
Office |
MC342-AirPrint |
Idle |
| OKI_MC342_36855D_PCL |
OKI-MC342-36855D PCL |
1060NP-Office |
Generic PCL Laser Printer |
Idle |
| OKI_MC342_IPP |
OKI-MC342-IPP |
Office |
Generic PostScript Printer |
Idle |
| OKI_MC342_LPR |
OKI-MC342-LPR |
Office |
Generic PostScript Printer |
Idle |
The first two printers were mapped by DNS, but the last two were mapped by IP address.
Changing the IP address was simple:
- Click on each link
- Select “Modify printer”
- Authenticate (only needed for the first printer change)
- For IPP: note the current address (like ipp://192.168.71.52/), then
- Choose “Internet Printing Protocol (ipp) “
- Click “Continue”
- Enter the correct ipp://…./ address (help is at http://127.0.0.1:631/help/network.html or http://127.0.0.1:631/help/network.html?PRINTABLE=YES)
- Click “Continue”
- Check the modifications (optionally change Description/Location)
- Click “Continue”
- Keep the driver
- Click “Modify printer”
- For LPD, note the current address (like lpd://192.168.71.52/), then follow the IPP steps, but choose “LPD/LPR Host or Printer” and enter a valid lpd address.
This is also the place where you can change “Default options”, like paper size (which – for all but the first – somehow defaulted to US Letter 11 inch, while it is actually filled with A4 paper).
At the end, disable the web interface: cupsctl WebInterface=no.
Related:
–jeroen
Read the rest of this entry »
Posted in *nix, *nix-tools, Apple, iMac, Mac, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, macOS 10.13 High Sierra, Power User | Leave a Comment »
Posted by jpluimers on 2019/04/25
Yes, occasionally, people still use DVD or CD disks, so thanks [Archive.is] Chris Bensen: macOS How to create an ISO from a CD or DVD:
Put in your CD or DVD, Open Terminal, type:
ls /Volumes
Find the volume in the list, then type where /path/to/volume is the CD or DVD you want:
hdiutil makehybrid -iso -joliet -o Image.iso /path/to/volume
–jeroen
Posted in *nix, Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Pro, macOS 10.12 Sierra, Power User | Leave a Comment »
Posted by jpluimers on 2019/03/29
When connecting from my Mac to my ESXi rig, some commands (especially less) show this output:
WARNING: terminal is not fully functional
So I created this alias to connect from my Mac to the internal address of my ESXi rig:
alias ssh-esxi-X10SRH-CF-internal='TERM=xterm ssh -p 22 root@192.168.71.91'
The trick is the bold part: TERM=xterm (which you can also replace by export TERM=xterm; if you want future ssh sessions to use the same [wayback] TERM setting).
The reason is that the Mac defines the TERM variable as containing xterm-256 which is defined on the Mac itself, but ESXi has a hard time coping with it.
Some Mac OS and Xcode combinations had a problem with xterm-256 not being present ([WayBack] macos – Terminal strangeness after installing Xcode on Lion – Super User), but this isn’t the case on my system:
$ ls -alh `find /usr/share/terminfo | grep 'xterm-256color'`
-rw-r--r-- 1 root wheel 3.2K Jul 30 2016 /usr/share/terminfo/78/xterm-256color
On the Mac you really want to use xterm-256color as it looks way better than xterm-color or xterm: [WayBack] linux – What is the difference between xterm-color & xterm-256color? – Stack Overflow (thanks [WayBack] Chris Page!)
It seems I already did something similar on ESXi itself to get esxtop working: ESXi: when esxtop shows garbage. That was on the ESXi side and works as well for this problem too.
However, it is a bit harder to have a script run during ESXi boot time that sets this, so it is easier to fix this on the Mac side.
It works for all OS X and ESXi versions I’ve tested so far.
–jeroen
Posted in *nix, Apple, ESXi5.1, ESXi5.5, ESXi6, ESXi6.5, iMac, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Virtualization, VMware, VMware ESXi | Leave a Comment »
Posted by jpluimers on 2019/02/22
This has happened to me on most Macs with most Apple Mac OS X / MacOS / whatever versions: the built in sound controls for internal speakers and head phones fail to work (keyboard shortcuts and UI both fail).
The solution at [WayBack] mavericks – Unable to modify the volume with the keyboard – Ask Different works, but be sure to require the kernel module steps:
open up a Terminal window and run:
sudo killall coreaudiod
sudo kextunload /System/Library/Extensions/AppleHDA.kext
sudo kextload /System/Library/Extensions/AppleHDA.kext
–jeroen
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacMini, macOS 10.12 Sierra, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2019/01/28
macOS DisplayLink driver downloads: 4.1 works fine with MacOS 10.12 Sierra on a 15-inch mid 2015 Retina MacBook Pro.
Downloads:
–jeroen
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Pro, macOS 10.12 Sierra, Power User | Leave a Comment »
The Wiert Corner - irregular stream of stuff 