Archive for the ‘MacMini’ Category
Posted by jpluimers on 2016/10/07
The most recent versions of Joe don’t even build from stock in OS X any more and there are no direct installers for them.
But there are two most recent older versions that have installers, and a formula recent brew based HomeBrew installation:
- joe-3.7-0.pkg – rudix-snowleopard – JOE – Rudix: The hassle-free way to get Unix programs on Mac OS X – Google Project Hosting.
- PROJECT DETAIL for Joe’s Own Editor.
- Homebrew Formulas – Joe.
After experimenting for a while without brew preferring the first over second, I’ve installed the the third as:
- The first actually installs version 3.6, but has the syntax highlighting files installed in the correct place, so you get syntax highlighting.
- The second does install version 3.7, but since the syntax highlighting files are in the wrong place: you get no syntax highlighting.
- The brew formula has an up to date joe version 4.0 and installs the syntax highlighting in the right place: you get syntax highlighting.
Before making a choice, you might want to consider reading about joe versions in JOE – Joe’s own editor / … /NEWS.md.
Having a background partially in the Linux world, I tried building joe from source on my Mac following the steps at JOE – Joe’s own editor / Discussion / joe-editor-general:Mac binary for 3.3 does not run on OS/X 10.8. It failed because the Mercurial 3.8 branch required automake and autoconf which are not available on just a Mac + Xcode. So I’m happy that others have bit the bullet and make a good HomeBrew build.
What makes HomeBrew so great is that it is based on a fully versioned git/ruby combination, allows for multiple Python versions, allows for binaries through bintray served bottles and has zillions (well, thousands) of installable formulae, all versioned.
–jeroen
Posted in *nix, *nix-tools, Apple, joe, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2016/09/26
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, OS X 10.11 El Capitan, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2016/08/17
A while ago, testssl.sh [WayBack] needed Darwin binaries (for OS X): Supply Darwin binaries + install documentation · Issue #127 · drwetter/testssl.sh [WayBack]
So I created the small Bourne shell (sh) script below to deliver them.
It allows me to update these gists:
The build script itself is in a gist as well: https://gist.github.com/f4de3937630b87753133.git [WayBack]
It helped me to contribute to these testssl.sh issues:
Not all of these binaries are in https://github.com/drwetter/testssl.sh/tree/master/bin [WayBack] as it makes the testssl.sh repository too bloated. Some (including non-OSX builds made by others) are here:
Eventually the script might get merged into https://github.com/drwetter/testssl.sh/blob/master/utils/make-openssl.sh [WayBack] as there is a Darwin switch in this commit: https://github.com/drwetter/testssl.sh/commit/6efc3e90f52e5926b0853d3b2fb221b631dcf452 [WayBack]
Read the rest of this entry »
Posted in Apple, Development, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OpenSSL, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Security, Software Development, xCode/Mac/iPad/iPhone/iOS/cocoa | Leave a Comment »
Posted by jpluimers on 2016/08/15
The culprit is usually the mds [WayBack] process (metadata server).
Simple command-line solution:
sudo killall mds
A more convoluted way with the Activity Monitor is in the link below.
–jeroen
via: Fix the OS X Finder not displaying the contents of specific folders | MacIssues [WayBack]
Posted in Apple, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.6 Snow Leopard, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, Power User | Leave a Comment »
Posted by jpluimers on 2016/06/07
Via the answer below I created the renew alias. I already had the first two aliases.
alias route-and-ipaddresses="netstat -nr | grep 'Internet\|Gateway\|default' && echo && ifconfig | grep '\: flags\|inet\|inet6' && echo more detailed info through ifconfig and netstat -nr"
alias whatismyip="curl http://whatismyip.akamai.com && echo"
alias renew_dhcp="sudo ipconfig set en0 DHCP && echo waiting 10 seconds for DHCP lease to be obtained && sleep 10 && route-and-ipaddresses && whatismyip"
–jeroen
via: network – How can I release and renew my DHCP lease from Terminal? – Ask Different.
Posted in Apple, bash, Development, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.6 Snow Leopard, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Scripting, Software Development | Leave a Comment »
Posted by jpluimers on 2016/04/25
For one of my USB backup drives, Time Machine was stuck showing “Preparing Backup”.
tmutil (which has a lot of undocumented parameters) helped me out.
tmutil status would not show any change for hours either:
retinambpro1tb:~ root# tmutil status
Backup session status:
{
BackupPhase = ThinningPreBackup;
ClientID = "com.apple.backupd";
DateOfStateChange = "2015-05-04 19:27:31 +0000";
DestinationID = "01AE12C7-1D3E-469E-BE7E-32DA30F0030E";
DestinationMountPoint = "/Volumes/Elements2TB1";
Percent = "-1";
Running = 1;
Stopping = 0;
}
...
retinambpro1tb:~ root# tmutil status
Backup session status:
{
BackupPhase = ThinningPreBackup;
ClientID = "com.apple.backupd";
DateOfStateChange = "2015-05-04 21:13:28 +0000";
DestinationID = "01AE12C7-1D3E-469E-BE7E-32DA30F0030E";
DestinationMountPoint = "/Volumes/Elements2TB1";
Percent = "-1";
Running = 1;
Stopping = 0;
}
So I:
- removed the .inProgress file found by
ls -al /Volumes/Elements2TB1/Backups.backupdb/`scutil --get ComputerName`/*.inProgress
- rebooted with the USB drive attached
- waited for spotlight to complete
- manually started a backup
- verified it made progress using tmutil (you need to run that as root, for instance with
sudo su -)
And it indeed made progress and finished:
Read the rest of this entry »
Posted in *nix, Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.8 Mountain Lion, Power User, SpotLight | Leave a Comment »
Posted by jpluimers on 2016/03/18
Nice summary for just saying “Use Tunnelblick”
This howto article explains how to obtain and setup a Mac openvpn client to connect to the OpenVPN Access Server.
Source: How to connect to Access Server from a Mac
–jeroen
Posted in Apple, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OpenVPN, OS X 10.11 El Capitan, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2016/03/07
Last friday I updated the examples at *nix networking – lsof: How to tell what process has a specific port open on Linux (via: Server Fault) as I needed to document some of the machines around here (so it becomes easier replacing them).
I also added some links to background information and (when I get to using it: OS X still goes without) a good iproute2 starter page.
–jeroen
Posted in *nix, *nix-tools, Apple, Communications Development, Cygwin, Development, Internet protocol suite, Linux, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.6 Snow Leopard, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, TCP | Leave a Comment »
Posted by jpluimers on 2016/02/26
It’s obvious if you have seen this once, but it wasn’t clear to me how to play only individual songs from a playlist. Luckily my search got this step by step guide as the first hit:
- Create the playlist.
- Uncheck all of the check boxes in the playlist (In iTunes for Windows, ctrl click one of the check marks to uncheck all of the checkboxes at once)
- Now double click (or select and press spacebar) a song to play it. It will stop when finished because there is no other song checked to be played next.
- If you want to change back to normal sequential play, ctrl click one of the check marks again to change all of the checkboxes back to the checked status.
The tip works for both Mac and Windows.
I needed this as part of a pub-quiz so I could finish the questions and answers before moving on to the next track in the playlist.
Thanks hiker1251!
–jeroen
via: Tip: How to play a playlist one song at a time … | Apple Support Communities.
Posted in Apple, iTunes, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, Power User, Windows | Leave a Comment »
Posted by jpluimers on 2016/01/27
Even after the SpeedTouch password algorithms were disclosed 2008, ISPs keep using weak algorithms to generate their default WPA/WPA2 passwords in their routers:
A short while ago, blasty published code to generate the WPA2 passwords for UPC routers. Even though Ziggo now owns UPC, a lot of this UPC equipment is still in use. I guess it won’t be for long that similar code for Ziggo routers will be published too.
The code at https://haxx.in/upc_keys.c is easy to download, build and run on a Mac OS X machine even when you don’t have Xcode installed (use the “xcode-select –install” trick):
wget https://haxx.in/upc_keys.c
gcc -O2 -o upc_keys upc_keys.c -lcrypto
./upc_keys UPC0053284 5
./upc_keys UPC0053284 24
–jeroen
Posted in *nix, *nix-tools, Apple, C, Development, gcc, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, MacMini, OS X 10.10 Yosemite, Power User, Software Development | Leave a Comment »
The Wiert Corner - irregular stream of stuff 