Archive for the ‘OS X 10.9 Mavericks’ Category
Posted by jpluimers on 2014/04/19
Reaver-WPS is an excellent tool to test the security of your WPA/WPA2 secured network against the WPS vulnerability.
Getting Reaver 1.4 (which contains wash to scan WiFi networks) to compile out of the box on OS X Mavericks (which is 10.9; why can’t they keep a successive version number in the product name?) didn’t work.
So I downloaded the adapted source pack from one of the comments in Issue 245 – reaver-wps – Support for Mac OS X? – Brute force attack against Wifi Protected Setup – Google Project Hosting (as the diff still not has been applied to the codebase)..
wash will detect most, but not all networks. I’ve net yet tried WireShark, wpscan and wspy yet (they re supposed to get all of them).
To speed up the checking process I tried on install aircrack-ng to associate a Mac with the target network. Compiling aircrack-ng on a Mac from source didn’t work at all. But after installing MacPorts, I could get the MacPorts version of aircrack-ng to work. The bad news: I could not get aircrack-ng to associate to the network.
So these were the commands I used: Read the rest of this entry »
Posted in *nix, *nix-tools, Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, Monitoring, OS X 10.9 Mavericks, Power User | Leave a Comment »
Posted by jpluimers on 2014/04/10
One of the frustrating things about using a Mac, is the pain to find keyboard shortcuts for everyday tasks.
Having had RSI in the early 1990s, I’ve learned to use the keyboard for virtually everything. So I’m used to find keyboard shortcuts on most operating systems, or write scripts to make common tasks easier.
On most *nix or Windows systems, those shortcuts are either there, easy to enable or tools are there to enable them.
For OS X, somehow this seems much harder, so I’m always glad to bumped into answers to questions like
Is there a keyboard shortcut to move a window from one monitor to another? – OSX/Ask Different.
From the answers in that question it is clear this is not built-in behaviour in OS X.
Also the answers show a few tools that can (some free, some paid). So those are on my research list.
But I’m already glad to know that these tools are available.
I’m also going to dig a bit more into Hands-on with OS X Mavericks: Multiple-display support | Macworld, as I’m sure there are some subtle things with multi-monitor setups that I’ve not yet found myself.
–jeroen
via: osx – Is there a keyboard shortcut to move a window from one monitor to another? – Ask Different.
Posted in Apple, Keyboards and Keyboard Shortcuts, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | 3 Comments »
Posted by jpluimers on 2014/03/29
Brilliant piece of open source:
SmallestDotNet – SmallestDotNet.com is a single page site that does one thing. It tells you the smallest, easiest download you’d need to get the .NET Framework on your system.
Even on Mac OS X it is helpful and recommends Mono and on iOS it recommends looking at MonoTouch.
Thanks Scott Hanselman for making this available!
–jeroen
via:
Posted in .NET, .NET 1.x, .NET 2.0, .NET 3.0, .NET 3.5, .NET 4.0, .NET 4.5, Apple, Development, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Software Development, Windows, Windows 7, Windows 8, Windows 8.1, Windows Server 2003, Windows Server 2003 R2, Windows Server 2008, Windows Server 2008 R2, Windows Vista, Windows XP | Tagged: .NET Framework, scott hanselman | Leave a Comment »
Posted by jpluimers on 2014/03/25
As a follow up on my recent rsync on ESXi 5.1 post, as – when rsync in ESXi terminates the hard way because of a lost SSH connection – rsync can leave “hidden” files behind.
A small script that recursively shows the hidden files (those starting with a dot) starting from the current directory:
find . -iname ".*"
More of those (including deleting them, filtering for only files or only directories, etc) are at Linux / UNIX: Bash Find And Delete All Hidden Files Directories.
Note: don’t try to outsmart using something like piping through grep "\/\." as that will also match files who’s parent directories are hidden.
–jeroen
via:
Posted in *nix, Apple, bash, Development, ESXi4, ESXi5, ESXi5.1, ESXi5.5, Linux, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Scripting, Software Development, SuSE Linux, VMware, VMware ESXi | Tagged: hidden files, rsync | Leave a Comment »
Posted by jpluimers on 2014/03/24
Blast from the past, and happy I found back the original blog that pointed me to this: Not a complete failure » Blog Archive » How to copy a file with I/O errors?.
A long while ago, I helped out a friend with a HDD that was partially working. He neede the bits of a file that had become unreadable by regular means.
dd to the rescue: it takes a lot longer, but gets the job done eventually. Eventually can be T+eternity.
Note that you always should copy such a file to another drive, like described in the above blog.
Something like this (the parameters are explained at the dd man page):
dd if=/mounting-path/directory-path/damaged.mp4 of=resurrected.mp4 conv=noerror,sync
Usually for creating disk images, dd works on *n*x, Mac OS X, Windows with for instance Cygwin, ESXi, etc.
See also: linux – Rescuing a hdd with bad sectors: dd vs gddrescue – Super User.
–jeroen
via: Not a complete failure » Blog Archive » How to copy a file with I/O errors?.
Posted in *nix, Apple, Cygwin, ESXi4, ESXi5, ESXi5.1, ESXi5.5, Linux, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, SuSE Linux, VMware, VMware ESXi | Leave a Comment »
Posted by jpluimers on 2014/03/06
Consolidation of HDD manufacturers (image from WikiMedia)
Earlier this year I wrote about Accessing Mac Hard Drives from Windows 7/8: Boot Camp Support Software 5.0.5033 and mentioned that there are also a few solutions for writing NTFS volumes from Mac OS X.
Thanks to dhardy03, I learned that Seagate now provides NTFS drivers for Mac OS X for Free. The installer name indicates it is an OEM version of the Paragon NTFS drivers for Mac OS X.
I’m not sure yet if it works only on Seagate drives, but since the only other HDD manufacturers left are Toshiba and Western Digital (Toshiba is a much smaller HDD manufacturer than WD and SD), it is a substantial part of the market.
I might try NTFS-3G as well, but that hasn’t been updated for a while and has been replaced by the commercial Tuxera product.
–jeroen
via:
Posted in Apple, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, Uncategorized | Tagged: HDD, NTFS, Paragon NTFS | Leave a Comment »
Posted by jpluimers on 2014/03/04
Interesting commands around networksetup -setairportpower en0 : power off and on your WiFi.
–jeroen
via: [Wayback/Archive] Quick Tip: Automating your Mac’s wifi power – BrettTerpstra.com.
Posted in Apple, Hardware, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, Network-and-equipment, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User, WiFi | Leave a Comment »
Posted by jpluimers on 2014/03/03
I’m a command-line addict, so this was a great SuperUser question by Željko Filipin:
I know how to find Mac OS X version from GUI: Apple Menu (top left) > About This Mac
Is there a Terminal command that will tell me Mac OS X version?
It was answered by User delfuego:
You have a few options:
sw_vers -productVersion
system_profiler SPSoftwareDataType
These commands led me to this post: Finding OS X Version and Build Information From the Command Line | The Nubby Admin that also showed these commands:
uname -a
osascript -e 'system info'
Where uname shows only the kernal version, oascript gives a ton of information. Read the rest of this entry »
Posted in Apple, Mac, Mac OS X / OS X / MacOS, Mac OS X 10.4 Tiger, Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, OS X 10.9 Mavericks, Power User | 2 Comments »
Posted by jpluimers on 2014/02/25
Posted in Apple, Delphi, Delphi XE2, Delphi XE3, Delphi XE4, Delphi XE5, Development, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.9 Mavericks, Power User, Software Development, xCode/Mac/iPad/iPhone/iOS/cocoa | 3 Comments »
Posted by jpluimers on 2014/02/24
Last week, Apple fixed the so called #gotofail bug for iOS devices. Other devices (Macs with OS X 10.9 Mavericks, maybe earlier versions and I also suspect Apple TV to be vulnerable) will follow soon.
I thought that Old iOS devices would be in the dark as the updates are for iOS 6.x and 7.x only. So any device that can only run on iOS 5 or lower might not be supported.
So I thought these devices would be unsupported, but found out an iPad 1st generation would pass the gotofail.com test.
So if you have any of these, please let me know if they fail or pass:
- iPhone 3 or earlier,
- iPod Touch 3rd generation or earlier,
- iPad 1st generation: passes.
Please watch any security announcements carefully with using Apple equipment, as the bug can highly facilitate a man-in-the-middle attack.
Some other site with background information (it hit the news wildly): Read the rest of this entry »
Posted in Apple, Development, iOS, iPad, iPhone, iPod, iPod touch, Mac, Mac OS X / OS X / MacOS, MacBook, MacBook Retina, MacBook-Air, MacBook-Pro, OS X 10.9 Mavericks, Power User, Software Development | 1 Comment »
The Wiert Corner - irregular stream of stuff 