I missed that over time, ipconfig has been extended with some more commands.
The command ipconfig /displaydns does exaxctly what I want: Display the contents of the DNS Resolver Cache.
The ipconfig help:
USAGE:
ipconfig [/allcompartments] [/? | /all |
/renew [adapter] | /release [adapter] |
/renew6 [adapter] | /release6 [adapter] |
/flushdns | /displaydns | /registerdns |
/showclassid adapter |
/setclassid adapter [classid] |
/showclassid6 adapter |
/setclassid6 adapter [classid] ]
where
adapter Connection name
(wildcard characters * and ? allowed, see examples)
Options:
/? Display this help message
/all Display full configuration information.
/release Release the IPv4 address for the specified adapter.
/release6 Release the IPv6 address for the specified adapter.
/renew Renew the IPv4 address for the specified adapter.
/renew6 Renew the IPv6 address for the specified adapter.
/flushdns Purges the DNS Resolver cache.
/registerdns Refreshes all DHCP leases and re-registers DNS names
/displaydns Display the contents of the DNS Resolver Cache.
/showclassid Displays all the dhcp class IDs allowed for adapter.
/setclassid Modifies the dhcp class id.
/showclassid6 Displays all the IPv6 DHCP class IDs allowed for adapter.
/setclassid6 Modifies the IPv6 DHCP class id.
The default is to display only the IP address, subnet mask and
default gateway for each adapter bound to TCP/IP.
For Release and Renew, if no adapter name is specified, then the IP address
leases for all adapters bound to TCP/IP will be released or renewed.
For Setclassid and Setclassid6, if no ClassId is specified, then the ClassId is removed.
Examples:
> ipconfig ... Show information
> ipconfig /all ... Show detailed information
> ipconfig /renew ... renew all adapters
> ipconfig /renew EL* ... renew any connection that has its
name starting with EL
> ipconfig /release *Con* ... release all matching connections,
eg. "Wired Ethernet Connection 1" or
"Wired Ethernet Connection 2"
> ipconfig /allcompartments ... Show information about all
compartments
> ipconfig /allcompartments /all ... Show detailed information about all
compartments
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters. Learn more about bidirectional Unicode characters
Navigation was a bit hard because of the visual overload on the site (look at the various Archive.is archivals), so here is the outlined list of sessions with the rough timestamps in the below live recordings:
The Badge Team needs volunteers helping them on the software side.
At the badge event, the version 1.0 firmware was flashed so the badge will function perfectly fine during the event, but it would be cool if more features are available that attendees can get when upgrading at the event or downloading from the hatchery.
There is a virtual environment to test and a GitHub projects page with open issues to get started.
The MCH2022 badge has an ESP32 (with WiFi!), a RP2040 and an FPGA next to a full colour TFT LCD, buttons (including joystick!), LEDs, LiPo battery, USB-C connector, micro SD-card slot and more (see below) and SHA2017 badge compatibility. How cool is that!
Though in practice there still are a few sites not having HTTPS (usually old blogs, sometimes old forums too), almost all have (thanks Let’s Encrypt!) and many not even support HTTP any more.
The Wiert Corner - irregular stream of stuff 